PRODUCT DESCRIPTION
The CELLSTAT SW1 & SW2 Master Enable Battery Monitor Switches are the only devices available with a built in Microprocessor.
This series is designed to identify and display Battery condition, level of charge and Electrical System charging (alternator) status. With the ignition in the off position, the CELLSTAT monitors the open circuit battery status. When the ignition is in the start position, it is performing a high amperage load test. When the ignition is in the on position, it is monitoring the alternator charging.
Status LED's are provided on the Master Enable Switch and the LCD Display. All the status LED's use a standard three color status: Green - Normal, Yellow - Warning, and Red - Danger.
The Optional LCD Display also shows voltage levels of both the batteries and alternator, along with status of the load test. Warning conditions result in a warning message and red LED's appearing on the LCD display.
The CELLSTAT Series is design to work with single or multiple battery banks. More than one may also be used on the same battery bank. An optional cross over switch can also be used to cross connect battery banks.
